Non-Standard Automation Flat Line Cutting Inspection Machine

Flat Cable Cutting Inspection Machine, FFC Flat Cable Cutting CCD Inspection Machine 1. Equipment Description This equipment is applicable for products with lengths less than 200mm and widths 6～30mm; mechanical arm repeat positioning accuracy: ≤±0.01 mm 4. Inspection Content: a: Appearance inspection b: After cutting, the size of metal conductors, the distance between the center lines of metal wires, the distance from metal wires to edge lines, reinforcement plates, etc., can all be inspected. The inspection accuracy can reach ±0.05mm. This equipment is a processing type for FFC connector cable: the equipment operates with a material tray loading method. The operator only needs to place the incoming FFC material onto the material rack, and the equipment automatically feeds it, cutting the material to the preset length. The cutting accuracy can reach 0.01, and the processed length of the cable needs further inspection by the CCD vision system. The equipment is simple yet precise in structure, with the material handling manipulator and unloading manipulator working synchronously, transferring inspected products to the inspection platform, which is made of a vacuum suction plate. Once inspection is OK, the manipulator stacks the products onto the unloading conveyor belt, and the quantity per stack is set according to customer requirements. The operator only needs to collect the material at the conveyor belt. The overall operation principle of the above equipment is welcomed for those who wish to download and study. Main Technical Parameters: Category Specifications Overall machine dimensions: 1850*1000*1800MM (L*W*H) Input Voltage: AC—220V 50Hz or AC—380V 50Hz (optional) Maximum power: 0.8KW (at 220V) Input air source pressure: 0.4-0.6 Mpa Air consumption: 1.5 L/min Production efficiency (C/T): ≤2.8 S/piece Equipment utilization rate: ≥95% Applicable product specifications: Length less than 200mm, width 6～30mm; mechanical arm repeat positioning accuracy: ≤±0.01 mm Inspection content: a: Appearance inspection b: After cutting, the size of metal conductors, the distance between the center lines of metal wires, the distance from metal wires to edge lines, reinforcement plates, etc., can all be inspected. The inspection accuracy can reach ±0.05mm.